For this product a Multicolour LED lightbulb with remote
control is supplied. (Mod. 20-01-01).
Functions
• 16 preset colours, including: White
• Automatic colour change program
• Colour memory function
• Manual colour selection
• Customisable brightness control
For more details please refer to www.moree.de.
Ver
si
on
1.1 D-EN
©
2012
M
or
ee Ltd.
www.moree.de
Moree Ltd.
Kaiserswerther Markt 11
40489 Düsseldorf
Germany
Designed by Aleksandr Mukomelov
Produced by Moree in Germany © 2012
© 2012 - Design Patented.
Products are subject to change.
Refer to our website for the latest information about our
products.
Distribution
Shark Outdoor LED
Original Packaging
The device can be safely transported in the original
packaging. If insufficient protective packaging is used,
the customer is liable for any damages during transpor-
tation.
PLEASE KEEP THE ORIGINAL PACKAGING AND USE IT,
IF POSSIBLE, IN CASE OF WARRANTY, OR RETURN OF
THE EQUIPMENT.
Bedienungsanleitung/ Instruction Manual
SHARK OUTDOOR/ SHARK OUTDOOR LED
Mod. 26-02-01
Shark Outdoor
Mod. 26-02-01-LED
Shark Outdoor LED
MADE IN GERMANY
•
Die Bedienungsanleitung vor dem ersten Gebrauch vollständig lesen und sorgfältig aufbewahren.
•
Please read the instruction manual fully, before using the product. Keep the manual for the entire
life of the product
.
Mod. Shark Outdoor LED
LEDs
MULTI
COLOUR
Mod. Shark Outdoor
Changing the Lightbulb
Place the product on a soft surface in order to avoid
scratching.
MAX
20 W
IMPORTANT !
Disconnect the product from
the mains before opening.
When assembling make sure the rub-
ber seal is positioned correctly and the 4
screws are attached securely.
(approx. 1 Nm)
Replace damaged seals immediately!
Bottom View
Maintenance
• Make sure that the power supply is disconnected
before cleaning.
• Clean the product with a soft, damp cloth only. Do not
use abrasives, alcohol or solvent based cleaners.
Peg Installation
1) Create an adequate hole for the peg in a suitable
soft surface (eg, a flat lawn area, flower bed).
2) Screw the peg by hand into the product base.
3) Press the product including peg into the hole. Ensure a
secure mounting of the product in the ground.
Disposal/ Ecology
Packaging materials and appliance are made from recyclable
materials. Seperation of the remaining waste materials into
different types facilitates the recycling of valuable raw materials.
When the appliance is to be no longer used please dispose of
the appliance in the proper manner.
This Symbol on the product indicates that it should not be
disposed in the normal houshold waste. Please take it to
a recycling point for electrical and electronic appliances
to be recycled in a proper manner.
Also rechargeable batteries which are dead or defective
should not be disposed of in the household rubbish; always take
them to a special waste disposal and make an important contribution
to protecting our environment.
Please obtain information on disposal from your local authority.
