Programming of the Remote Control
Manual 2.4 GHz Remot
e DE-EN V1.0
©
2016
M
or
ee Ltd.
2.4 GHz RF
Products
Die Bedienungsanleitung vor dem ersten Gebrauch vollständig lesen
und sorgfältig aufbewahren.
Please read the instruction manual fully, before using the product.
Keep the manual for the entire life of the product.
ENHANCING AMBIANCE
•
•
Bedienungsanleitung (DE)/ Instruction Manual (EN)
Mod. 20-02-02
2.4 GHz FERNBEDIENUNG/
2.4 GHz REMOTE CONTROL
a) Linking with the 2.4 GHz LED Product/ LED Bulb
First, you must turn off the LED lamp/ LED product
on the cord switch or turn off the power by the light
switch or unplug the power cord.
Turn it back on, and within 2 seconds press and hold
‘Zone On’ on the Zone number that you wish the
product to be a part of. When you have succesfully
synced the remote control to the product/ bulb, it
will flash 3 times.
Please see section c) for grouping multiple products
/ bulbs together.
b) Unlink with the 2.4 GHz LED Product/ Bulb
If you wish to unlink the Remote Control with the
product/ bulb, follow the same steps a section a),
but select the Zone the product/ bulb is currently on.
The successful unlinking with the RGBW Lightbulb
will result in the bulb flashing 6 times. You must do
this before you can relink to a new zone.
c) Grouping Multiple 2.4 GHz LED Products/ Bulbs
If you wish to control multiple products and bulbs
at the same time, you can link them to one of the
4 zones. Repeat section a) for each product/ bulb
under the zone of your choice.
d) Controlling various Zones
Now you have various products/ bulbs linked to
different zones. Press ‘Zone On’ button to control
the selected zone only. To return control to all zones
press ‘Master On’.
e) Functions
• To turn all lights white, press and hold ‘Master On’.
• To turn a selected light zone white, press and hold
your chosen ‘Zone On’.
• Scroll the colour ring to select any colour.
• Press the mode button to navigate through a
selection of light programmes.
• Use the +/- speed buttons to adjust the speed of the
programmes.
Master ON (all Zones)
Long Press = all white
Master OFF (all Zones)
Zone ON
(Long Press= white)
Colour Wheel
Brightness -
Speed -
Zone OFF
Programme
selection (Mode)
Indicator LED
Speed +
Brig
Zone 1-4
I
0
I
0
I
0
I
0
Original Packaging
The device can be safely transported in the original
packaging. If insufficient protective packaging is
used, the customer is liable for any damages during
transportation.
PLEASE KEEP THE ORIGINAL PACKAGING AND
USE IT, IF POSSIBLE, IN CASE OF WARRANTY, OR
RETURN OF THE EQUIPMENT.
Disposal/ Ecology
Packaging materials and appliance are made from recyclable
materials. Seperation of the remaining waste materials
into different types facilitates the recycling of valuable raw
materials. When the appliance is to be no longer used please
dispose of the appliance in the proper manner.
This Symbol on the product indicates that it should
not be disposed in the normal houshold waste.
Please take it to a recycling point for electrical
and electronic appliances to be recycled in a
proper manner.
Also rechargeable batteries which are dead or defective
should not be disposed of in the household rubbish; always
take them to a special waste disposal and make an important
contribution to protecting our environment. Please obtain
information on disposal from your local authority.
www.moree.de
Moree Ltd.
Kaiserswerther Markt 11
40489 Düsseldorf
Germany
©2014 - Products are subject to change.
Refer to our website for the latest information about
our products.
Distribution
Maintenance
• Make sure that the power supply is disconnected
before cleaning.
• Clean the product with a soft, dry cloth only. Do not
use abrasives, alcohol or solvent based cleaners.
