Mopedia Tulipan MI100, Инструкция по эксплуатации, Страница: 27 / 60

7
ENGLISH
8.2 Electrical assembling kit (only MI120 - MI140)
Once get like the Fig. 4
A Remote Controller Timotion Pc.1
B Power supply Timotion Pc.1
C Control unit Timotion Pc.1
D/E Actuator Timotion Pc.1 Pz.2
(Fig.4) (Picture with illustrative purpose only)
(Fig.5) (Picture with illustrative purpose only)
• Plug the end connector with the electric actuator, paying attention to the tooth position,
then secure the cables with the plastic cap. (Figure n.5)
• Repeat this operation for the other components
8.3 Disassembling
• Follow the procedure described above in reverse.
9. BEFORE TO USE
• Always check the status of the mechanical parts in order to guarantee they are used in
total safety for persons and environment.
• Check the proper assembly of the device with attention to the correct insertion and locking
screws and nuts of the headrest and footrest.
• Check the correct raising/lowering of foot rest frame and head frame.
10. PRECAUTIONS FOR USE
• Do not exceed the maximum load capacity for any reason.
• When lowering the head or foot section, make sure that nobody inserts hands, legs or other
body parts under the bed base.
• Make sure that the floor surface supporting the bed is uniformly level.
• Before any operation of cleaning, maintenance, or simply move the bed, disconnect the plug
of the mains voltage.
• Do not use multiple plugs or extension cables.
• Do not connect to the bed, some electrical devices not due by the normal operation.