69
Rev. 1.1
2018/04
400-820-9661
M2DC Series Hardware Manual
6.4 Operations of JOG Mode
Step
LED display
Description
1
Press
to switch from Monitor Status mode to the Drive Parameters Configuration mode
2
Scroll with the
keys to select parameter P62 (SI)
3
Press
key to enter the value setting mode
4
Scroll with the
keys to change values
5
Press and hold the
key for 1 second to confirm the set value
6
Press the
key to enter Function Operation mode
7
Scroll with the
keys to select Function F06 (MC) to enable the motor
8
Press and hold SET key for 1 second, to enable the drive. The last dot will appear to
show the drive is enabled.
9
Scroll with the
keys to find function F01 (CJ) to run JOG mode.
10
Press the
key to enter JOG mode
11
Press the
key and the motor will rotate in a CW direction at 1rps.
12
Press the
key and the motor will rotate in a CCW direction at 1rps.
13
Press the
key to stop the motor
14
Press the
key to get back to the Function Operation mode.
