8
Brugermanual
Moonboon slyngevugge
8
User manual
Moonboon baby hammock
Place the baby in the middle of the hammock such that the head is ele-
vated slightly as compared to the feet.
The child’s head goes in the end opposite the buttons. Place a larger
child as close to the head end assembly of the hammock as possible.
Make sure that the cross pin is horizontal as it keeps the shape of the
hammock.
Placement of the child
Height
It is essential that the hammock does not touch the floor during operation.
Before using the hammock, perform two tests to ensure that the hammock
does not touch the floor.
First test: Empty hammock
Mount the hammock as instructed and manually stretch the spring as
much as you can. Pull on the spring until you feel the safety strap (the
nylon strap inside the spring) preventing any further expansion. When the
spring is fully extended, space must remain between
the bottom of the hammock and the floor.
Now place the child in the hammock and repeat the test described
above: Stretch out the spring until you feel the safety strap keeping it from
stretching further.
Here, too, space must remain between the bottom of the hammock and
the floor.
Second test: Child in the hammock
It is important to ensure that duvets,
blankets, wraps, and the like are
never placed on top of baby’s head.
If using a cover, make sure it is firmly
tucked in under baby’s arms and
come up no higher than the chest.
Please note
Follow these instructions and perform
the tests regularly as your child
grows and becomes heavier. That
is how you ensure that the hammock
never touches the floor.
Please note
