Moog G396-026, Руководство по эксплуатации

Страница: 18 / 85

Programmable Multi-Axis Servo Drive Power Supply Unit Operation Manual
ID no.: CA97556-001 Date: 03/2015
moog
18
Mechanical installation
A
B
C1
H1
H3
H
H2
C
T
D D
Figure 2.6 Dimensional drawing, air-cooled housing, example for size 5
E
G
F
F
Figure 2.7 Mounting distance, air-cooled housing, example for size 5
2.3.1 Dimensions, air-cooled housing
Size Size 5 Size 6A
Device
G396-026-xxx-xxx
G396-050-xxx-xxx G396-075-xxx-xxx
G396-110-xxx-xxx
Weight
13 kg (28.7 lb) 32 kg (70.6 lb)
B (width)
190 (7.48) 280 (11.02)
H (height) 1)
345 (13.58) 540 (21.26)
T (depth) 1)
240 (9.45) 322 (12.68)
A
150 (5.91) 200 (7.87)
C
407 (16.02) 581 (22.87)
C1
6 (0.24) 10 (0.39)
H1
419 (16.50) 600 (23.62)
H2
15 (0.59) 20 (0.79)
H3
64 (2.52) 166 (6.54)
D
Ø 6 (0.24) Ø 10 (0.39)
Fixing screws
4 x M5 4 x M8
E
Direct butt-mounted, maximum
2 (0.08)
Direct butt-mounted, maximum
2 (0.08) / 40 2)
F 3)
≥180 (7.09)
G 3)
≥300 (11.81) ≥500 (19.69)
All Dimensions in mm (in),
1) Without terminals, connectors
2) Mounting distance size 6A to other size 6A
3) Also take into account the bend radius of the connecting cables
Table 2.1 Dimensions, air-cooled housing
NOTE:
Arrange devices with different drive power in descending order of power
output (e.g. viewed from the left size 4-size 3-size 2-size 1). This minimises the
mutual thermal influence. The Power Supply Unit must always be arranged on
the side of the most powerful servo drive. When butt-mounting other devices
with the multi-axis system, you must make sure that the devices do not affect
one another thermally.