Specifi cation
Cat a log
Number
Section
INSTRUCTIONS 5050
3
MODEL: Accessories
PM3
PRODUCT INSTRUCTIONS
STANDARD IN STAL LA TION PROCEDURE
INCLUDES MODELS: PM3
STANDARD ACCESSORIES (Supplied)
4 - Hex Head Bolts (3/8" - 16 x 2.0")
4 - Lock Washers (3/8")
4 - Nuts (3/8")
2 - Stainless Steel Straps
2 - Slide Buckle
PRECAUTIONS ON INSTALLATION
1.
The pole mount adapter Model TC931PM3 is de signed for
outdoor use, and mounting to a pole in con junc tion with a
wall mount bracket.
2.
The combined weight of camera, lens, housing, pan/tilt,
and
the wall mount bracket must not exceed 150 lbs. (67 kg).
3
. Select a location where the combined weight of the brack-
et,
housing, pan/tilt and the wall mount bracket can be
properly sup port ed.
DISCLAIMER
CAUTION:
This unit must be properly and se cure ly mount ed
to
a supporting structure capable of sus tain ing the
weight of the bracket and camera assembly.
Accordingly:
1
. The installation should be made by a qual i fi ed installer.
2
. The installation should be in compliance with local codes.
3
. Care should be exercised to select suitable hardware to
install the unit, taking into account both the com po si tion
of the mount ing surface and the weight the hard ware will
be re quired to sustain.
I
NSTALLATION
1
. Combine the WM bracket with the pole mount adapter and
fi rmly attach it with four hex head bolts lock washers and
nuts provided.
2525 Park Central Blvd. • Decatur, Ga 30035 • (770) 987-7550 • 800-554-1124 U.S. & Canada • www.videolarm.com • Fax 800-826-0366
2
. Mount the bracket assembly to the pole by using the
stainless steel straps provided. (See banding instruc-
tions)
BANDING INSTRUCTIONS
1.
Band may be used from bulk roll as this com plete ly elimi-
nates waste of band. Slide buckle on band as shown,
bringing the end of band around object to be clamped
and again through buckle.
2.
Continue band around object once more and again through
buckle. Double banding develops a great deal more
radial com pres sion than single banding. Bend the end of
the band under buckle.
Band Gripper
Lever
Tool Nose
Slide
Tension handle
REVISION DATE: May 16, 2003
