Purpose
Purpose
This guide describes the Moog Animatics Ethernet Serial Encapsulation protocol provided by
the Class 6 EtherNet/IP (EIP) SmartMotor™ (see the following figure). It describes the major
concepts that must be understood to integrate a SmartMotor slave with an Ethernet Serial
Encapsulation master device. It also includes a byte-by-byte discussion of the Moog Animatics
Ethernet Serial Encapsulation protocol.
NOTE:
The feature set described in this version of the manual refers to SmartMotor
(–EIP option) firmware version 6.0.2.28 and netX firmware (NXF) version 3.3.0.3.
NOTE:
The keepalive feature to reset broken connections requires firmware
6.0.2.41 or higher with netX firmware (NXF) version 3.4.0.5 or higher. Earlier
firmware versions will not activate this feature.
The Ethernet Serial Encapsulation protocol was developed by Moog Animatics as a means for
the Class 6 EtherNet/IP (EIP) motor to receive and send serial communications over Ethernet.
In addition to this protocol, Moog Animatics offers a variety of other fieldbus protocol options
for the Class 6 M-style motors, such as EtherNet/IP, Modbus, and more. Please contact Moog
Animatics for details.
Moog Animatics Class 6 SmartMotor™ Ethernet Serial Encapsulation Guide, Rev. B
Page 5 of 32
Содержание Smart Motor SM23166MT
Страница 31: ......
Страница 32: ...PN SC80100017 001 Rev B Ethernet Serial Encapsulation ...