Page 27
PL52DF* Indoor Gas Fireplace
XG0218 - 160215
Installation
Installing the Driftwood Log Set
Step 1.
Remove the glass door as described in the
previous section.
LGS58
1
2
3
4
5
6
Step 3.
Unpack the logs and handle with care.
Step 2.
Ensure selected media is installed per instruction
as per
Figures 24 - 24d
or
25 - 25a.
Step 4.
Place Log 3 from LGS58 in the back right corner
of the burner tray. Ensure log does not cover ports.
Place Log 2 of LGS58 on top of log 3.See
Figure 26b.
Step 5.
Place Log 5 from LGS58 on top of Log 2. Place
Log 1 from LGS58 on top of log 2, see
Figure 26c.
3
2
1
5
LGS59
1
2
3
4
5
6
The PL52DF* has the option of installing a drift wood log
set. Once the firestones or speckled stones have been
installed the log set can be installed.
Ensure logs are securely placed and will not tip or fall.
Remove media where logs touch the burner tray to ensure
a more secure position.
Lean the logs against the back panels.
NO LOGS SHOULD
LAY ACROSS OR OVER TOP OF THE BURNER PORTS
ON THE SURFACE OF THE BURNER.
Figure 26
.
Figure 26a
.
Ports
Figure 26b
.
Ports
Pilot
Step 6.
Place log 6 of LGS59 across of log 1 of LGS58,
see
Figure 26e
.
Figure 26c
.
Figure 26d
.
6
Figure 26e
.
Ports
Ports
