27
Installation
xg0207 - 170223
H38ST Installing the Logs and Embers
H42ST Installing the Logs and Embers
STEP 1:
Place Logs' "A" on Left & Right stands.
STEP 1:
The two bottom logs ("A" & "B") are mounted on the
burner grate as shown
STEP 2:
log "c" Installation.
STEP 3:
log "d" Installation.
STEP 4:
log "e" Installation.
STEP 2:
Place logs' "b" as shown, in front of Right-hand "A", and
behind left-hand "b".
STEP 3:
log Installation. (Place logs' "c" on-top of logs "A".
Indentations on-top of logs' "A"
INSTALLING THE EMBER MATERIAL
the ember material is
supplied in two packages. Place the material evenly, forward of
both log stands, under logs 'A' and 'b', also forward from logs
'C' & 'D'. Refer to figure 25b. Ensure the burner holes are free of
ember material after placing the embers.
STEP 4:
completed Installation.
Figure 22.c
Figure 22.c
Figure 22.c
Figure 22.c
Figure 22.c
Figure 22.d
Figure 22.e
Figure 22.f
LOG A
LOG B
LOG c
LOG D
LOG E
LOG B
LOG c
LOG D
LOG D
LOG A
LOG A
LOG c
LOG D
LOG E
LOG B
LOG c
Section 9: Installing the Accessories
