Montesa COTA 300RR 2018, Руководство пользователя

Страница: 16 / 176

Operating instructions
1-5 1-5
Setting mode
The main screen is used to adjust the following
settings:
1. Changing the speed units
1. Start the motorcycle.
2. Press the M (Mode) button.
– Keep it pressed for several seconds and the speed
units will change from km/h to mph and vice versa,
depending on their initial setting.
(1) SPEEDOMETER
(2) TURN SIGNAL INDICATOR
(3) HIGH BEAM INDICATOR
(4) ODOMETER
(5) MALFUNCTION INDICATOR LAMP (MIL)
Odometer/Speedometer (2ED)
Instruments and indicators
The indicators are located in the speedometer.
The display has two functions, odometer and speedometer.

Speedometer: Shows riding speed. This shows your
speed in kilometers per hour (km/h).

Odometer: Shows accumulated mileage.

High beam indicator (blue): Lights when the headlight
is on high beam

Turn signal indicator (green): Flashes when the turn
signal operates.

Malfunction indicator lamp (MIL). When any abnormality
occurs in the system, the ECM turns on the MIL.
(1) M (MODE) BUTTON
(2) S (SET) BUTTON
(1) SIDE STAND
(2) SIDE STAND SPRINGS
Inspection
1. Check the stand springs for damage or loss of tension.
2. Check the side stand assembly for freedom of
movement.
If the stand is stiff or squeaks, clean the area around
the pivot and lubricate the pivot bolt with grease or oil
lubricant.
NOTICE
Do not start the motorcycle while supported on the side
stand, which could be bent.
2ED 2ED
1 2
4
5
3
2ED 2ED
2ED 2ED
2 1
2
1