Monte Carlo Fan Company MCDF series, Руководство пользователя и инструкция по установке

Страница: 6 / 8

6
© 2011 Monte Carlo Fan Company
3/8/2012
19
22
20 21 Fan angle
adjustment
Remove coupling covers and then
Remove the set screw on both side of
coupling for the fan angle adjusting. Keep
screws.
Adjust the fan to the direction you want.
Align the holes on coupling and reinstall
the set screws remove in step 19.
Reinstall the coupling covers removed in
step 19.
It can be adjusted with 3 different angles
and the fans at both sides can be fixed at
different angles.
Note
: A slight wobble is possible with
some fan models. Adjust the fan speeds
and/or angle of the fans until wobble has
been eliminated.
If you want to replace downrod with
longer one (not included). Loosen the set
screw by allen wrench provided and
remove Pin and hanger ball from
downrod.
Place hanger ball on long downrod with
pin through downrod and seat in the slot
in hanger ball.
Tighten the set screw to hold downrod
with hanger ball securely.
Warning : Pin must be installed in slot
and through downrod
Downrod replacement
Pin
Downrod
Hanger ball