Monte Carlo Fan Company MCDF series, Руководство пользователя и инструкция по установке

Страница: 4 / 8

4
© 2011 Monte Carlo Fan Company
3/8/2012
7 8 9
10 11 12
Thread lead wires and safety cable
through rod. (
Note:
Keep the safety
cable free inside of rod).
Aligning the marks (arrows) on rod
and coupling and slip the rod onto
coupling
and then reinstall the set
screws remove in step 4.
Remove 3 preassembled set screws from
the other side of rod. Keep screws for
later use.
Remove bottom cover from fan adapter
assembly by removeing 4 set screws.
keep screws for later use.
Insert the rod ( rod assembled with fan )
into housing of fan adapter assembly.
aligning the holes on the rod and the
holes on the coupling seated inside
housing and then reinstall the set screws
removed it step 8.
Connect white wires from fans to white
wire from fan adapter. Blue wires from
fans to blue wire from fan adapter. Black
wires from fans to Black wire from fan
adapter.
If you want to install light kit on the
addapter. Use the light kit lead wires (as
shown in inset) provided, Connect white
wire with all other white wires together
and connect blue wires with all other blue
wires together.
Warning : Do not connect different
finishes of wires together. Wrong wire
connection may result in electric shock
hazard or serious personal injury.
Note : Refer to instruction manual of light
kit for light kit installation.
Reinstall the bottom cover removed in
step 9.
Fan adapter assembly
Rod