Monte Carlo Fan Company MCDF series, Руководство пользователя и инструкция по установке

Страница: 3 / 8

3
© 2011 Monte Carlo Fan Company
3/8/2012
1 2 3
4 5 6
Coupling
Rod
ON
OFF
ON
OFF
Before you begin installing the fan, Switch
power off at Service panel and lock
service disconnecting means to prevent
power from being switched on
accidentally. When the service
disconnecting means cannot be locked,
securely fasten a warning device, such
as a tag, to the service panel.
Before installing this fan make sure the
outlet box is properly installed to the
house structure. To reduce the risk of
fire, electric shock, or personal injury,
mount to outlet box or supporting system
acceptable for fan support.
(Mounting must support at least 35 lbs.)
Use metal outlet box suitable for fan
support and use only the screws provided
with the outlet box (must support 35
lbs). Before attaching fan to outlet box,
ensure the outlet box is securely fastened
by at least two points to a structural
ceiling member ( a loose box will cause
the fan to wobble). Remove the two outlet
box screws provided with the box,
aligning the holes of the mounting
bracket with the holes of the outlet box.
Re-install the 2 outlet box screws
securely.
Remove preassembled rod from coupling
by removing 3 set screws. Keep screws
for later use.
Remove bolt, nut and set screw from
coupling. Keep the parts for later use.
Thread the lead wires and safety cable
from fan through the coupling.
Slip coupling onto the yoke of fan.
Aligning the holes on coupling and yoke
and then reinstall the bolt, nut and set
screw removed in step 5.
Note: Install bolt from the side with mark
(arrow).
Mounting bracket