background image

5

13

14

15

© 2022 Monte Carlo Fan Collections

4/2022

16

17

18

Light pan

After making the wire connections, the 

wires should be spread apart with the 

grounded conductor and the 

equipment-grounding conductor on one 

side of the outlet box and ungrounded 

conductor on the other side of the outlet 

box. The splices after being made should 

be turned upward and pushed carefully up 

into the outlet box.              

Loosen 2 and remove 1 preassembled 

screw from the plate on motor. Save 

screw for later use.

Attach light pan onto the plate on motor, 

Place light pan over the lead wires from 

fan, aligning the keyhole slots on the light 

pan with the preassembled screws on the 

plate. Twist clockwise till lock. Reinstall 

the other screw. Tighten all screws 

securely.

 

Loosen 2 and remove 1 preassembled 

screw from light pan. Save screw for later 

use.

 

Canopy bottom

cap

Partially loosen one and remove one 

preassembled step screw from mounting 

bracket (Do not remove the other set 

screws). Save the screw.

Lift canopy up, aligning its keyhole slot 

with the preassembled step screw on 

mounting bracket and twist clockwise to 

lock in place. Reinstall the other step 

screw and tighten the screws securely.

Attach canopy bottom cap onto canopy 

by aligning its holes with the step screws 

on mounting bracket and fix it with the 

magnet embraced in the cap.

Plate on motor

Grounded wire

Ungrounded wires

Step screw

Connect white wire from fan to white wire 

from LED light kit and then connect blue 

(or black) wire from fan to black (or blue) 

wire from LED light fixture.

Attach LED light fixture onto the light pan, 

aligning the keyhole slots on the light 

fixture with the preassembled screws on 

the light pan and twist clockwise till lock.

Reinstall the screw removed in step 17. 

Tighten all screws securely. 

This light kit includes 2700 (Warm white), 

3000 (Soft white) and 4000K (Daylight) 

correlated color temperatures (CCT). Get 

desired CCT by operating the converted 

switch. 

LED light 

fixture

40

00

K

   

  3

00

0K

   

 2

70

0K

Color temperature 

converted switch

Содержание 3JVR44 D Series










Отзывы: