Monte Carlo Fan Company 3ERAR52 D Series, Руководство пользователя и инструкция по установке

Страница: 5 / 9

5
13 14 15
16 17 18
© 2022 Monte Carlo Fan Collections
1/2022
Insert blade into the slot on flywheel.
Install blade with screws and washers
provided, aligning each of the holes as
shown and tighten all screws securely.
Repeat this process for remaining blades.
Connect the quick connector to the
connector from the light pan. Be sure
plugs connection clasped together firmly.
Attach light pan onto the plate on motor,
Place light pan over the lead wires from
fan, aligning the keyhole slots on the light
pan with the preassembled screws on the
plate. Twist clockwise till lock. Reinstall
the other screw. Tighten all screws
securely.
Loosen 2 and remove 1 preassembled
screw from light pan. Save screw for later
use.
Connect white wire from fan to white wire
from light fixture and then connect blue
(or black) wire from fan to black (or blue)
wire from light fixture. Be sure plugs
connection clasped together firmly.
Attach light fixture onto the light pan,
aligning the keyhole slots on the light
fixture with the preassembled screws on
the light pan. Twist clockwise till lock.
Reinstall the other screw. Tighten all
screws securely.
Install 2 x 9-watt medium base enclosed
type of LED lamps.
Caution : Approved for use with LED light
bulb only (Part No. 97512S).
Do not use incandescent light bulb .
Caution : Do not replace bulb until it
cools down.
Loosen 2 and remove 1 preassembled
screw from the plate on motor. Save
screw for later use.
Light pan Plate on motor
Light fixture
Blue
Black
White
Bulb
Blade