Carefully lift the fan motor assembly
and engage the slot in the motor
bracket with the hook on the mount-
ing plate so that the motor is secure-
ly suspended.
8
Aline the clips on the housing with the
holes in the mounting plate
12
Attach blade to blade bracket using
the screws and washers provided.
Tighten each of the screws securely.
Repeat this process 2 more times.
14
Attach blade assembly to the motor
and tighen screws securely. Repeat
this process 2 more times.
15
Loosen 2 screws and remove 1 screw
from motor plate and save.
16
Align keyslot holes of the switch
housing plate to the holes of the
motor plate and twist to lock. Add
the screw removed from step 16.
Tighten securely.
17
Remove 3 screws from switch hous-
ing plate. Save the screws for future
use.
18
Lift the motor bracket so that the
threaded studs on the mounting
plate protrude through the slots in
the motor bracket. Securely tighten
the locknuts onto the threaded
studs.
11
Make wire connections to power source using wire
nuts provided. Make sure that no filiments are outside
of the wirenut. After making the wire connections, the
wires should be spread apart with the grounded con-
ductor and the equipment-grounding conductor on one
side of the outlet box and ungrounded conductor on
the other side of the outlet box.
10
Make wire connections as per above diagram.
Connect the white wire from the fan to the
White or Neutral wire from the power source.
Connect the black wire from the fan to the
Black or hot wire from the power source.
Connect all Green / Yellow wires from the fan,
Downrod and mounting bracket to the Ground
wire from the house.
9
House
Fan
Black
White
Green
Black
White
Green(downrod)
Green(Bracket)
Securely attached the mounting
plate to the outlet box using two
screws supplied by the outlet box.
Use metal outlet box suitable for fan
support (must support 35 lbs).
7
Lift motor housing cover up and turn it
clockwise to hold in position.
13
