5
13
14
15
17
16
© 2021 Monte Carlo Fan Collections
5/2021
18
Install a blade onto the flywheel.
Align the holes on the blade and the
screw holes on the flywheel and install it
with screws provided. Repeat this
process for remaining blades. Tighten all
screws securely.
Place the lead wires from fan over the
central hole of light pan.
Aligning the keyhole slots on the light pan
with the preassembled screws on the
plate. Twist clockwise till lock. Reinstall
the screw which was just removed.
Tighten all screws securely.
Loosen 2 and remove 1 preassembled
screws from light pan. Keep screw.
Connect white wire from fan to white wire
from LED light fixture and then connect
blue (or black) wire from fan to black (or
blue) wire from LED light fixture. Be sure
plugs connection clasped together firmly.
Attach LED light fixture onto the light pan,
aligning the keyhole slots on the LED light
fixture with the preassembled screws on
the light pan. Twist clockwise till lock.
Reinstall the screw which was just
removed. Tighten all screws securely.
Note
: If you don’t want to install the fan
with LED light, go to step 18 for blanking
plate installation.
Attach glass by locating dimples in light
pan with grooves on the glass and twist
clockwise until tight.
Attach glass by locating dimples in light
pan with grooves on the glass and twist
clockwise until tight.
Isolate the quick connects with electrical
tape.
Attach blanking plate by locating dimples
in light pan with grooves on the blanking
plate and twist clockwise until tight.
Note
:
Do not install LED light fixture if
use blanking plate.
Loosen 2 and remove 1 preassembled
screw from the plate on motor. Save
screw for later use.
Plate on motor
LED light fixture
Install LED Light Fixture
Glass
Blanking plate
Install Blanking Plate
Flywheel
Blade
Light pan
