background image

MTTMB-V2-061205

 

Pg 

1 of 4

 

Copyright 2002-2005, Monster Tower, Inc.

 

 

 

 

Monster Tower Mirror Installation 

Instructions and Owners Manual

 

Monster Tower, Inc. 

5714 US Hwy 411 S 

Maryville, TN 37801

 

Phone: 877-77-Tower  

Fax: 877-232-6538  

www.MonsterTower.com 

[email protected]

 

 

 

 

THANK YOU FOR YOUR BUSINESS.  IF YOU ARE NOT COMPLETELY SATISFIED IN ANY WAY 
WITH YOUR NEW TOWER MIRROR, PLEASE CONTACT US.  Our entire purpose as a company is 
to offer great products at affordable prices that our customers love. 

 

Please take a few minutes to read the installation instructions and become familiar with the tower 
mirror and installation before beginning to ensure a high quality, trouble free installation and 
use.  If you have any questions during your installation give us a call at 877-77-Tower or e-mail 
[email protected]

 

 

 

IMPORTANT NOTES ON INSTALLING AND USING YOUR NEW MIRROR 

 

 

Keep the mounting post lubricated 

  Do not stand on the tower mirror as it can bend the tube and abuse is not 

covered under warranty 

  Be sure the adjuster knob and cam lever provide a tight fit between the 

mounting post or receiver tube.  Failure to tighten this can result in a lost mirror, 

which is not covered by warranty.  Test this by pulling on the mirror each time 

before use. 

  

Содержание MIR

Страница 1: ...o read the installation instructions and become familiar with the tower mirror and installation before beginning to ensure a high quality trouble free installation and use If you have any questions during your installation give us a call at 877 77 Tower or e mail Support MonsterTower com IMPORTANT NOTES ON INSTALLING AND USING YOUR NEW MIRROR Keep the mounting post lubricated Do not stand on the t...

Страница 2: ...p screws A Snug the collar for now so you can rotate it to the desired location but tighten screws to a torque setting of 22 ft lbs before using It is important to tighten the screws evenly or collar may bind causing thread damage A small gap between mounting collar halves will remain when tightened properly Notice Improper bolt torque could lead to poor performance or product failure 4 Attach the...

Страница 3: ...he bracket INSTALLATION OF THE MIRROR TO THE MIRROR ARM The mirror clamp must be removed from the mirror to fit onto the Mirror Arm 1 Remove the mirror bolt and clamp from the CIPA mirror 2 Push the mirror clamp over the mirror arm and adjust to the desired location 3 Slide the mirror clamp into the mirror replace mirror bolt and tighten The clamp should go in very tight and use pliers or channel ...

Страница 4: ... cloth after each use Soapy water or a commercially available marine water spot remover can be used as needed Use only glass cleaner to clean the mirror face and occasionally wash the anodized aluminum Armor All can be used on the black plastic shell of the mirror Monster Tower Inc Warranty Monster Tower warrants this product against manufacturer s defects for a period of five 5 years Anodized sur...

Отзывы: