17
(NOTE: NUMBERS REFER TO DRAWINGS ON PAGE 15)
8. Antenna Coaxial Input/Output:
The input connects the coaxial cable from your TV antenna.
The output connects the coaxial cable to the input of your TV or VCR (or signal splitter).
9. Satellite Coaxial Input/Output:
The input connects the coaxial cable from your Satellite dish.
The output connects the coaxial cable to your satellite receiver input.
10. CATV Coaxial Input/Output:
The input connects the coaxial cable from your cable TV company.
The output connects the coaxial cable to input of your TV or VCR.
11. Digital Isolation Filter (Unswitched Outlets):
These outlets have a special filter circuit that is designed
to reduce interference to your digital components. Make sure to match the appropriate Identification Sticker
to each component’s power cord.
IMPORTANT NOTE
It does not harm video components or audio components to be connected
to the digital filter section. However, for the best possible performance, we recommend plugging
in only digital components here.
12. Video Interference Reduction Filter (Unswitched Outlets):
These outlets have a special filter circuit
that is designed to reduce interference to your video components. Match the appropriate Identification Sticker
to each component’s power cord.
IMPORTANT NOTE
It does not harm audio components or digital components to be connected
to the video filter section. However, for the best possible performance, we recommend plugging
in only video components here.
