10
Replacing the Battery
The remote control uses a CR2025 battery. Perform the following steps to replace the
battery.
1.
Push the tab on the side of the battery tray towards the tray.
2.
Pull the battery tray out of the remote control.
3.
Remove the old battery, then place a new CR2025 battery into the battery tray with
the + side up, as shown in the accompanying image.
4.
Push the battery tray back into the remote control until the tab on the left side
engages and locks the tray in place.
PHYSICAL CONNECTIONS
This soundbar features four different physical audio inputs, which can be connected as
detailed in this section. You can use and switch between multiple connections.
Note that if
you have the HDMI® ARC, OPTICAL, or COAXIAL input selected and no sound is present,
you may need to activate PCM audio output on your audio source device.
HDMI ARC
Assuming that your HDTV supports the Audio Return Channel (ARC) and Consumer
Electronics Control (CEC) features of the HDMI® specification, the HDMI ARC input is the
ideal audio input for audio when watching TV. The ARC feature allows audio to be