27
2.
Rotate the Knob until the Pause Print option is highlighted, then press the Knob to
pause the print. The printer will finish the current layer, then will pause printing.
3.
When you are ready to resume the print, rotate the Knob until the Resume Print
option is highlighted, then press the Knob to resume the print. The printer will heat
the Nozzle to the target temperature, extrude a small amount of filament, then
display the Resume Options Menu.
4.
Clean the extruded filament, rotate the Knob until the Continue option is
highlighted, then press the Knob to resume printing.
Changing Filament While Printing
1.
With the Printing... Screen displayed, press the Knob to display the Print Control
Menu.
2.
Rotate the Knob until the Pause Print option is highlighted, then press the Knob to
pause the print. The printer will finish the current layer, then will pause printing.
3.
Rotate the Knob until the Auto Retract Filament option is highlighted, then press
the Knob to start the Unloading Filament process.
5.
Once the filament has been unloaded, replace the spool of filament on the Filament
Holder with a new spool of filament.
