background image

  

This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following 
measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected. 

 

Consult the dealer or an experienced radio/TV technician for help. 

 

Notice for Industry Canada 

This Class B digital apparatus complies with Canadian ICES-003. 
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du 
Canada. 

Monoprice™, Blackbird™, the Blackbird logo, and all Monoprice logos are 

trademarks of Monoprice Inc. 
HDMI®, the HDMI Logo, and High-Definition Multimedia Interface are trademarks 
or registered trademarks of HDMI Licensing LLC in the United States and other 
countries. 

HDCP™ is a trademark of Digital Content Protection LLC.

 

EDID® is a registered trademark of the Video Electronics Standards Association. 

Содержание Blackbird 43959









Отзывы: