5
PRODUCT OVERVIEW
Transmitter
1.
HDMI OUT: HDMI® loop-out port for connecting a local display.
2.
HDMI IN: HDMI port for connecting a video source device.
3.
EDID: Momentarily press the EDID button on the transmitter to get the
EDID from the display connected to the receiver. Press and hold the
EDID button for 3 seconds to get the EDID from the display connected
to the transmitter's loop-out port. If no display is connected to the
transmitter's loop-out port, it will get the internal EDID of 1080p video
with stereo audio instead.
4.
DC 5V: Micro USB port for connecting the included AC power adapter.
5.
OUT: RJ45 Ethernet jack for a Cat5e or Cat6 Ethernet cable (available
separately) to connect to the receiver.
6.
IR IN: 3.5mm jack for connecting an IR receiver to allow for control of the
display device connected to the receiver.
7.
IR OUT: 3.5mm jack for connecting an IR transmitter to allow for control
of the video source device from the remote location.
