Monoprice Blackbird 39669 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 40

Monoprice Blackbird 39669 Скачать руководство пользователя страница 5

5

•

Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or
detergents. For stubborn deposits, moisten the cloth with warm water.

•

This device has no user serviceable parts. Do not attempt to open, service, or
modify this device.

INTRODUCTION

This

Blackbird™ 4K 4x4 HDBaseT™ Matrix features 4 HDMI® inputs, 1 HDMI output with

audio breakout, and 3 HDBaseT outputs. It supports video resolutions up to 4K@60Hz with
YCbCr 4:4:4 and can transmit 4K video to distances up to 131 feet (40 meters) and 1080p
video to distances up to 229 feet (70 meters) over a single Cat5e/6 Ethernet cable. Audio
extracted from the HDMI signal can be output using the digital optical S/PDIF and
balanced stereo analog connectors. It supports bidirectional IR extension and features
front panel buttons, IR remote control, RS-232, and Web GUI control options. It supports
the Power over Cable (PoC) feature, which allows the receivers to draw their power from
the matrix over the Ethernet cable. It includes smart EDID® management using the 4-pin
DIP switch on the rear panel.

«
...
3
4
5
6
7
...
»

Содержание Blackbird 39669









































Отзывы:

Нет отзывов