Monoprice 30526, Руководство пользователя

Страница: 35 / 67

35
Changing Views
You can change the camera angle in relation to the model and build area using a variety of
methods.
Drag: Click the View icon, then drag the camera using one of the following methods.

Left click and hold, then move the mouse.

Click and hold the mouse wheel, then scroll up or down.

Hold down the SHIFT key, right click and hold, then move the mouse.
Rotate: Click the View icon, then rotate the camera using one of the following
methods.

Right click and hold, then move the mouse.

Hold down the SHIFT key, left click and hold, then move the mouse.
Scale: Scroll the mouse wheel up or down to zoom the camera in or out.
Set View: You can select one of six preset camera angles using one of the following
methods.

Click the View menu, then select one of the six options from the drop-down list.

Click the View icon, then click it again and a submenu will appear with six
options for selection.
Reset View: You can reset the camera angle to the default using one of the following
methods.

Click the View menu, then select Home View.

Click the View button, the click it again and a submenu will appear. Select the
Reset option.
Show Model Outline: You can set FlashPrint to show the model outline highlighted in
yellow. To do so, click the View menu, then select the Show Model Outline option.
Show Steep Overhang: When the intersection angle between the model surface and a
horizontal line is within the overhang threshold value, the surface has steep
overhang and is shown in red when Show Steep Overhang is enabled. To enable or