Monoprice 30526, Руководство пользователя

Страница: 43 / 67

43
Speed: Click the Speed tab to reveal the speed settings.

Print Speed: Determines the speed that the extruder moves while printing
filament. It can be set from 10 to 200 mm/sec in 10mm/sec increments. The
slower the speed, the higher quality the resulting printed models. For PLA
printing, 80mm/sec is recommended.

Travel Speed: Determines the speed that the extruder moves while moving from
place to place and not actively printing filament. It can be set from 10 to 200
mm/sec in 10mm/sec increments. The slower the speed, the higher quality the
resulting printed models. For PLA printing, 100mm/sec is recommended.
Temperature: Click the Temperature tab to reveal the temperature options.

Right Extruder: Sets the operating temperature of the extruder from 0 to 248°C,
in 5°C increments. Set the temperature according to the type of filament being
printed.

Platform: Sets the operating temperature of the build platform from 0 to 120°C,
in 5° increments. Set the temperature according to the type of filament being
printed.
Others: Click the Others tab to reveal additional options.

Pause At Heights: Sets the height at which the print will automatically be
paused. This is usually done to allow you to change filament at one or points.
Click the Edit button to set the pause point(s). The print can be paused
anywhere from 1 to 59.9 mm.