Monoprice 21666, Руководство пользователя

Страница: 6 / 58

6
•
Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or
detergents. For stubborn deposits, moisten the cloth with warm water.
•
This device has no user serviceable parts. Do not attempt to open, service, or
modify this device.
•
Take care to avoid touching hot parts, including heat blocks, extruder nozzle,
extruded filament, and the heated build plate.
•
Do not wear gloves when operating or repairing to avoid entanglement.
•
Keep the printer and all accessories out of reach of children.
• Do not force or tear anything during unpacking and setup. This may cause damage
to the printer and/or its accessories.
•
Take care not to remove or damage the black PEI build mat on the build platform.
This mat is essential to ensure the 3D model properly adheres to the build platform
during printing. If this mat becomes damaged or wears out, replace it with painter's
tape, Kapton® tape, or ordinary masking tape.
•
Do not reach inside the printer during operation.
•
Always allow the printer and extruded filament to cool before reaching inside.
• Ensure that the printer is turned off and unplugged from its power source before
making repairs or performing service.
INTRODUCTION
Thank you for purchasing this MP Mini Delta V2 3D Printer from Monoprice ™ ! This printer
features a single extruder, which is capable of printing with PLA, ABS, wood fill, copper fill,
steel fill, bronze fill, and many other materials. You can print from a Windows® or Mac® PC
using a Wi-Fi®
connection or can print from 3D model files stored on a microSD™ card,
without the need for a PC connection of any kind. This printer is easy to setup and easy to
use following the instructions in this manual.