Monoprice 21666, Руководство пользователя

Страница: 52 / 58

52
Everywhere option is usually only necessary for very complex models with parts
that overhang other parts.
In most cases, the Brim option for the Platform adhesion type is sufficient and is
easier to remove and clean up. The Raft option builds a flat layer on which the
model is then built that will need to be removed once the print is complete.
Feel free to experiment with these options to achieve the best possible print.
Congratulations! Cura is now installed and ready for use. Refer to the Cura documentation
for operating details and information about the various options.
CARE AND MAINTENANCE
All 3D printers require periodic maintenance, including several maintenance tasks that
should be performed on a daily basis.
Cleaning the Nozzle
Extruded filament and filament particles can build up around the nozzle. Use tweezers and
a cleaning cloth to remove any extraneous material.
Clearing a Blocked Nozzle
Unplug the filament tube from the air connector. Insert the
1.5mm hex wrench into the top of the air connector and push
the filament out from the nozzle. Remove the hex wrench,
insert the filament tube into the air connector, and push it in
about 1.5mm.