24
Bluetooth® Connection
Perform the following steps to establish a Bluetooth® connection between the media
player and your mobile device.
1.
Momentarily press the MODE button until the LCD Display shows bt. The media
player is now ready to pair with your mobile device.
2.
Open the Bluetooth settings on your mobile device and scan for nearby devices.
Locate and select the A 18802 entry.
3.
Once the connection is established, you can use the controls on the media
player or on your mobile device to control audio playback.
FM Playback
Perform the following steps to use the media player's built-in FM tuner.
1.
Ensure that you have an FM antenna connected to the unit and that it is close to
a nearby window for improved reception.
2.
Momentarily press the MODE button until an FM frequency is shown on the LCD
Display.
3.
Perform one of the following methods for tuning an FM station.
Momentarily press the button to automatically scan for an FM station.
The scan will stop on the first station with a sufficiently strong signal.
Momentarily press the button again to continue the scan until you find a
station you want to listen to.
Use the
and
to manually tune to a specific FM frequency. Each press
of the
button decreases the displayed frequency by 1 MHz, while each
press of the
button increases the displayed frequency by 1 MHz.
MP3 Recording
1.
Insert an SD™ card into the SD Card Slot or plug a USB drive into the USB Port.
2.
Press and hold the
button for 3 seconds. The LCD Display will show REC and
the media player will begin recording an mp3 file mixed from all connected
audio sources (Mic 1-4 and Aux 1-2).
Содержание 18802
Страница 18: ...18 Sample Connection Diagram ...
Страница 19: ...19 Block Diagram ...
