Monomachine SFX-6 Скачать руководство пользователя

Страница: 87 / 158

THE SONG MODE

the song transport controls as described in “SONG EDIT TRANSPORT” on page 77 to
select a new position to start from.

SONG TRACK TRANSPOSE

Here the transpose settings for the patterns in a song are controlled.

By pressing

[ENTER/YES]

in the transpose column of the EDIT SONG window you

reach the SONG TRACK TRANSPOSE menu.

Use the

[RIGHT]

and

[LEFT]

keys to move between the columns, and also to reach the

lower row. Use

LEVEL

to update the parameter values. Use the

[UP]

and

[DOWN]

keys

to move between the song rows. Press

[EXIT/NO]

to exit the SONG TRACK TRANS-

POSE window.

TRN

(pattern transpose) control the pattern transpose.

TR1..6

(track 1-6 transpose) controls the individual track transpose for the six internal Mon-

omachine tracks. The six parameters on the MIDI row control track transpose for the six
MIDI sequencer tracks.

•

The track transpose settings made are only valid on that particular row.

•

If individual track transposes are set for a row, the transpose value in the EDIT
SONG window is exchanged for a bold “T”. You then need to enter the SONG
TRACK TRANSPOSE window to check the settings.

SONG EXTRA

The SONG EXTRA window is the interface for controlling song row mutes and song row
BPM settings.

Содержание SFX-6































































































































































Результаты поиска

Содержание SFX-6

Отзывы:

Похожие инструкции для SFX-6

Бренды по названию

Популярные бренды

Monomachine SFX-6, Руководство пользователя

Результаты поиска

Содержание SFX-6

Отзывы:

Похожие инструкции для SFX-6

Бренды по названию

Популярные бренды