4
•
Do not plug this device into the switched output of a preamplifier or other audio
component. This amplifier requires higher current levels than these devices are
designed to handle.
•
Unplug this device from the power source when not in use.
•
Never unplug the unit by pulling on the power cord. Always grasp the connector
head or adapter body.
•
Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or
detergents. For stubborn deposits, moisten the cloth with warm water.
•
This device has no user serviceable parts. Do not attempt to open, service, or
modify this device.
INTRODUCTION
This power amplifier features eight channels, each of which is capable of outputting more
than 200 watts (42564) or 100 watts (42565) of power into 8 ohm loads. A trigger input
allows for remote power on when a source device is powered on. Each channel is
protected with Hypex® protection circuits for superior fault protection.
FEATURES
•
20Hz ~ 20kHz ±0.5dB frequency response
•
Eight balanced 3-pin XLR inputs
•
200 watts per channel into 8 ohms (42564 only)
•
100 watts per channel into 8 ohms (42565 only)
•
Rated for 4 ~ 16 ohm loads
•
Hypex® protection circuits
