7. Reports
5.
At the "Close Batch?" prompt, select
No
.
The terminal displays a "Close Failed" message, finishes printing the Batch Totals report with the message
on it and returns to the transactions menu.
7.9
The Terminal Parameters Report
This report provides a printout of the current parameter configuration on the terminal. Included in the printout
are:
•
software revision number (Application ID),
•
terminal identification information (Terminal Serial #:),
•
PINpad configuration,
•
features enabled from the CONFIGURATION menu, including Terminal Parameters, Debit Parameters and
Tip Parameters,
•
tip processing setup (Tip Parameters),
•
receipt setup (Receipt Parameters) and
•
communications parameters (Dial Parameters and Ethernet Parameters).
To print the Terminal Parameters Report:
1.
, select
DEBIT & CREDIT
.
The message "Activating App..." is displayed, then the
2.
Press the
REPORTS
key (first purple key on the right).
If the "Password:" prompt appears, key in the
OK
key.
3.
On the REPORTS menu, select
Terminal Parms
.
The terminal prints the report and returns to the REPORTS menu.
4.
Press the red
CANC ANNUL
key to return to the transactions menu.
Note: If a
, it will appear in this
report at "None".
7.10
The EMV Parameters Report
This report prints a list of EMV parameters and their values by EMV card record number.
To print the EMV Parameters Report:
1.
, select
DEBIT & CREDIT
.
The message "Activating App..." is displayed, then the
2.
Press the
REPORTS
key (first purple key on the right).
If the "Password:" prompt appears, key in the
OK
key.
3.
On the REPORTS menu, scroll down and select
EMV Param Rpt
.
The terminal prints the report and returns to the REPORTS menu.
4.
Press the red
CANC ANNUL
key to return to the transactions menu.
126
Moneris Vx810 Duet Operating Manual