Moneris smartselect, Руководство по эксплуатации

Страница: 88 / 198

On-Screen Calculator
78 SmartSELECT Merchant Operating Manual v 2.0
11.2:Transferring a Calculator Value
To use the on-screen calculator to calculate a value then transfer that value to the
Enter Transaction Amount
screen, when the
Enter Transaction Amount
screen
appears in the transaction:
1. Press Calculator . The Calculator screen appears.
Note: If a value other than zero is on the Calculator screen, press
0
(the Zero
button) to clear the value.
2. To calculate a value, use the numbers and math symbols on the keypad as you
would a regular calculator.
3. When you have finished calculating the value you need, press
Exit
. The
Enter
Transaction Amount
screen appears with the
Trans from Calc
button enabled.
4. Press the
Trans from Calc
button. The amount on the calculator appears on
the
Enter Transaction Amount
screen.
5. Press
Enter
to use the value as the transaction amount and continue the finan-
cial transaction following the regular instructions for completing the transac-
tion.
11.3:Clearing the Calculator
You must clear the calculator manually. It does not clear automatically after the
financial transaction is completed.
Once you use the
Trans from Calc
button on the
Enter Purchase Amount
screen,
you cannot access the calculator again until you begin another purchase. However,
the calculated value remains on the calculator display even after that transaction is
completed or cancelled, even after the terminal is logged off then logged on again.
To clear the calculator, from the
Enter Transaction Amount
screen:
1. Press
Calculator
. The Calculator screen appears.
2. Press the
Clear
or
CE
button. The value will change to:
• 0 in Number mode
• 0.00 in dollar mode
3. Press
Exit
. The
Enter Transaction Amount
screen reappears. The
Trans from
Calc
button is disabled.