Moneris smartselect, Руководство по эксплуатации

Страница: 149 / 198

SmartSELECT Merchant Operating Manual v 2.0 139
ERNEX Electronic Marketing Programs
H.2.2: ERNEX Host Configuration
Initialize with ERNEX
Perform this transaction for each terminal that will be processing ERNEX transac-
tions.
1. Press
Menu
.
2. Press
Admin
.
3. Scroll down and select
ERNEX Administration
.
4. Select
ERNEX Initialization
5. Key in the ERNEX Terminal ID (min. 1, max. 9 digits; provided by ERNEX)
and press
Enter
OR
Press
Enter
if the correct Terminal ID is displayed.
6. The terminal communicates with the ERNEX host then returns to the Idle
prompt.
Re-initialize with ERNEX
Be sure to close any open ERNEX batches and print out any reports for that batch
before re-initializing your terminal with ERNEX. This function will clear and
reset the ERNEX information in your terminal.
1. Press
Menu
.
2. Press
Admin
.
3. Scroll down and select
ERNEX Administration
.
4. Select
ERNEX Initialization
5. Key in the ERNEX Terminal ID (min. 1, max. 9 digits; provided by ERNEX)
and press
Enter
OR
Press
Enter
if the correct Terminal ID is displayed.
The
Do you wish to clear ERNEX storage?
prompt appears.
6. Select
Yes
.
7. The terminal communicates with the ERNEX host then returns to the Idle
prompt.
Host Communication Test
Perform this function to test the communications from the SmartSELECT termi-
nal to the ERNEX Host without swiping an ERNEX card.
1. Press
Menu
.
2. Press
Admin
.
3. Scroll down and select
ERNEX Administration
.
4. Select
ERNEX Communication.
5. Once the test is complete, press
Exit
.