Moneris Mobile 8100, Руководство по эксплуатации

Страница: 31 / 86

Moneris Mobile 8100 Merchant Operating Manual v1.01 25
Configuring Your Terminal
5.3: Multiple Terminal Setup – ADMIN 80
This function allows you to enable Multi-terminal Reporting. which allows you to
close batches and print totals reports for a group of terminals from one terminal.
Multi-terminal Reporting is composed of two functions:
• Multiple Terminal Batch Closing allows you to close, by Terminal Name,
any terminals associated with the same Merchant Number as the terminal on
which you are performing the Close Batch.
• Multiple Terminal Deposit Totals allows you to obtain deposit totals, by
Terminal Name, for any terminals associated with the same Merchant Number
as the terminal on which you are performing the Close Batch.
In order to process a close batch for a group of terminals you must have:
• more than one terminal associated with your merchant number
• a unique name associated with each terminal
• each terminal set up to allow Close by ADMIN 99.
5.3.1: Enable Multi-terminal Transactions
TERMINAL DISPLAY OPERATOR'S ACTIONS
SWIPE CARD OR
PURCH REF OTHR
Press
ADMIN
.
ENTER ADMIN CODE
Enter
80
and press
OK
.
MULTI TERM TRANS
ENTER PASSWORD
Enter your password ( if enabled ) and press
OK
.
MULTI TERM TRANS
YES NO
Select
F1
to enable Multi-terminal Reporting.
Select
F2
to disable Multi-terminal Reporting on
this terminal and set this terminal’s Terminal Name
to spaces.
If you selected
F1
(Yes) the following prompt appears:
MERCH TERM NAME
Key in the terminal name and press
OK
. (Refer to
section
2.1.1: Keypad
for instructions on entering
alphabetic characters.)
If a terminal name is displayed and you wish to
keep it, press
OK
.
If a terminal name is displayed and you wish to
change it, press
CORR
, key in the new name and
press
OK
.
Note: A maximum of 100 names can be
associated with a Merchant Number.
CLOSE BY ADMN 99
YES NO
Press
F1
to allow this terminal to be closed by
another terminal using the Multiple Terminal Report
(ADMIN 85).