Moneris iPP320 PIN Pad, Быстрая установка

Страница: 19 / 30

Moneris® iPP320 PIN Pad Merchant Resource Center Quick Install Guide 17
3. Configure the iPP320 PIN Pad for dynamic IP
a. On the "ETHERNET IP TYPE" screen, press the F4 key ( DYNAMIC ).
ETHERNET IP TYPE
STATIC DYNAMIC DYNAMIC
b. When the "CLOUD SETUP" screen displays, press the green key
( PRODUCTION ).
CLOUD SETUP
PRODUCTION
TEST
PRODUCTION
c. When the next "CLOUD SETUP" screen displays, press the green key
( PRODUCTION ).
CLOUD SETUP
PRODUCTION
PRODUCTION
d. When the "ENTER HOST CONNECTION TIMEOUT" screen displays, press the
green
key to continue
ENTER HOST
CONNECTION TIMEOUT
20
e. When the "PED SERIAL NUMBER" screen displays, note the displayed eight-
digit serial number (starts with "61").
Note: The serial number is the iPP320 PIN Pad's terminal ID (e.g.,
"61012345"). You will be instructed to refer to the terminal ID during the
upcoming setup steps. (The terminal ID is also printed on a sticker affixed to
the iPP320 PIN Pad.)
f. Press the green key to continue.
Note: Once the iPP320 PIN Pad reboots, it will briefly display
"NO CONNECTION TO THE CLOUD PRESS OK TO CONNECT" followed by the
"WELCOME/BONJOUR CC" screen.
PED
SERIAL NUMBER
61012345
g. When the "Pairing Token" screen displays, go to step 5 ( Pair the iPP320 PIN
Pad with your Merchant Resource Center store ) on page 20.

If the "NO CONNECTION TO THE CLOUD PRESS OK TO CONNECT" screen
displays continuously, see page 25 for troubleshooting.
Pairing Token:
123456
3