Mondolfo Ferro Aquila Alliance, Руководство оператора

Страница: 87 / 352

AQUILA ALLIANCE
User Manual 87
- Noise level:
• Weighted sound pressure level A (L
pA
) in the work place ........................... < 70 dB(A)
Motor rating kW Rotation
speed rpm
Torque
Nm
Weight of electric/
electronic part kg
200/230Volt/1ph 50/60Hz MI 0.75 6-15 1200 10.2
115Volt/1ph 50/60Hz MI 0.75 6-15 1200 10.2
The noise levels indicated correspond to emission levels and do not necessarily represent safe
operating levels. Although there is a relationship between emission levels and exposure levels,
this cannot be used reliably to establish whether or not further precautions are necessary. The
factors which determine the level of exposure to which the operator is subject to include the
duration of the exposure, the characteristics of the workplace, other sources of noise, etc. The
permitted exposure levels may also vary according to the country. However, this information
will enable machine users to make a more accurate assessment of hazards and risks.
1.2.e. AIR PRESSURES
The machine is equipped with an internal pressure limiting valve to minimize the risk of
over inflating the tyre.
•
EXPLOSION HAZARD
•
Never exceed the tyre pressure recommended by the tyre
manufacturer. Never mismatch tyre size and rim size.
•
Avoid personal injury or death
DANGER
1. Never exceed these pressure
limitations:
• Supply line pressure (from compres-
sor) is 220 psi (15 bar).
• Operating pressure (gauge on regu-
lator) is 145 psi (10 bar).
Bead setting pressure (gauge on hose) is the tyre manufacturer’s maximum pressure as stated
on the sidewall of the tyre
2. Activate air inflation jets only when sealing the bead.
3. Bleed air pressure system before disconnecting supply line or other pneumatic compo-
nents. Air is stored in a reservoir for operation of inflation jets.
4. Only activate the air inflation jets if the rim securing device is locked in place and the tyre
is properly clamped (when possible).