Mondolfo Ferro Aquila Alliance, Руководство оператора

Страница: 113 / 352

AQUILA ALLIANCE
User Manual 113
The use of inflation devices (e.g. guns) connected to power sources outside of the
machine is not permitted.
DANGER
Always comply with national safety regulations as they could be more restrictive than
what is indicated in the manual, according to the principle that a more restrictive
standard takes precedence over the less restrictive one.
NOTICE
If tires being mounted require more than the
tire manufacturer’s maximum bead seating
pressure and , the wheel should be removed
from the tire changer, placed in an inflation
cage, and inflated per manufacturer’s instruc-
tions.
DANGER
Verify that both upper and lower tyre beads and the rim bead seat have been properly
lubricated with an approved mounting paste.
Safety goggles with plain lenses and safety footwear must be worn.
Lock the rim on the turntable during inflation.
Remove valve stem core if not already done.
Connect inflation hose to valve stem.
Step down partially on the pedal to inflate the tyre and seal beads with the inflation hose.
Frequently stop to check bead seating pressure on the gauge.
Avoid personal injury. Carefully read, understand and observe the following instruc-
tions.
1. Overinflated tyres can explode, producing hazardous flying debris that may result in
an accident.
2. Tyres and Rims that are not the same diameter are “mis-
matched”. Never attempt to mount or inflate any tyre and rim
that are mismatched. For example, never mount a 16” tyre on a
16.5” rim (or vice versa). This is very dangerous. A mismatched
tyre and rim could explode, resulting in an accident.
3. Never exceed the bead setting pressure (gauge on hose)
WARNING