1
2
3
4
5
6
Mark the center where the clock
will be installed and drill a hole
to fix the template.
Position the template so that it indi-
cates the position of the hours 12
o’clock and 1 o’clock and mark
these positions with a pencil.
Rotate the template clockwise by 30º
aligning the hole that was previously
used to mark the 12 o’clock position
over the 1 o’clock position and now
mark the location of 2 o’clock.
Continue to repeat the procedure
described in step number 3 until
you have marked the locations on
the wall of all 12 hours of the clock.
NOTE: Skip steps 2, 3, 4 if the clock does not include hour markings.
Mount the movement box inside
the clock container.
caution: do not forget to insert
the 1.5v battery
.
Installation Instructions
Содержание Nomon Series
Страница 2: ...Installation Instructions...