23
5.7.1 NONE
To cancel the DELAY mode, press the MENU button when NONE is
displayed.
5.7.2 PHASE
To Delay by PHASE, press the MENU button when PHASE is
displayed.
This method of delay is set the same as PHASE in JOG.
NOTE:
The adjustments happen in
real time
, so if the strobe is
flashing the user can view the effect of changing the delay.
5.7.3 TIME
To Delay by TIME, press the MENU button when TIME is displayed.
This method of delay is set the same as TIME in JOG.
NOTE:
The adjustments happen in
real time
, so if the strobe is
flashing the user can view the effect of changing the delay.
5.7.4 VRPM
Virtual RPM (VPRM) is an AUTO delay mode. To set VRPM, press
the MENU button when VRPM is displayed.
The virtual RPM value will be shown. Use the joystick to set the
desired value (refer to
). VRPM can be set from -60.0
RPM to +60.0 RPM.
Press the MENU button to accept and exit.
NOTE:
The adjustments happen in
real time
, so if the strobe is
flashing the user can view the effect of changing the RPM.
To exit the DELAY Menu, press the Power button.
Press the Power button to escape back out of the setup menu.
MENU button POWER button On-Target indicator Joystick arrows
