7
Press
◄
or
►
to change
the digit that blinks.
Press
▲
or
▼
to increase
or decrease the value of
the blinking digit. Hold
for auto increment or
decrement.
To confirm that the strobe is flashing at the same rate that the
target is moving and that the RPM/RPS reading is accurate, use the
x2 button until you see a double or multiple image, then use the
÷2 button until you see a single image. This will now be the correct
speed (see Figure 3).
Press the MENU button.
Use the joystick to x2 or ÷2.
4.1.2
Doubling or Halving the Flash Rate
Press the MENU button and the display will show the x2 and ÷2
icons. Use the left
◄
and right
►
buttons on the joystick to double
or halve the flash rate. Press the POWER button to exit this mode.
MENU button POWER button On-Target indicator Joystick arrows