75W DALI LED Driver
Montageanleitung / Mounting Instruction
| 26 | 11 | 2021
Austria, 4600 Wels, Europastraße 45, T: +43 7242 698-0, M: office
@
moltoluce.com
75W DALI LED DRIVER
1 / 4
1
TECHNISCHE DATEN / TECHNICAL DATA
Beschreibung
75W DALI LED Driver
Description
75W DALI LED Driver
Abmessungen LxBxH: 486x31x21mm
Dimension
Artikelnummer 711-24752dt8
Product Code
IP20
Produktdaten
Product Data
75W DALI LED Driver
75W DALI LED Driver
Wichtig: Lesen Sie alle Anweisungen vor der Installation!
Important: Read All Instructions Prior to Installation
75W DALI LED Driver(DT8)
70220048
Function introduction
Important:
Read All Instructions Prior to Installation
MTBF
Others
Over Current
Yes, recovers automatically after fault condition is removed
Over Temperature
Protection
Yes, recovers automatically after fault condition is removed
Max. Case Temp.
88
℃ (Ta="
")
45
℃
Working Humidity
Working Temp.
Environment
-
25 ~ +45
℃
℃
10% ~ 95% RH non-condensing
Storage Temp.
& Humidity
-
40 ~ +80 , 10% ~ 95% RH
℃
℃
Withstand Voltage
I/P-O/P: 3.75KVAC
Isolation Resistance
Safety Standards
Safety &
EMC
I/P-O/P: 100M Ohms / 500VDC / 25
℃ /
70% RH
EMC Emission
EN55015, EN61000-3-2, EN61000-3-3
EMC Immunity
EN61547, EN61000-4-2,3,4,5,6,8,11,
surge immunity Line-Line 1KV
Product Data
Voltage Range
100-277V AC
Power Factor (Typ.)
Efficiency (Typ.)
Frequency Range
50/60Hz
Input
Rated Power
max. 75W
Output
Max. Current
DC Voltage
Max. 3.12A/ch, ch1+ch2=3.12A
LED Channel
2
Voltage Tolerance
±
1%
>
0.99 @ 100VAC, > 0.96 @ 230VAC
Total Harmonic
Distortion
AC Current (Typ.)
Inrush Current (Typ.)
Leakage Current
Standby Power
Consumption
COLD START 2A at 230VAC
THD
≤
15% (@ full load / 230VAC)
0.9A @ 100VAC, 0.39A @ 230VAC, 0.33A@277VAC
<
0.5mA /230VAC
<
0.5W
86% @ 230VAC full load
Control
Dimming Interface
Dimming Range
Dimming Method
Dimming Curve
0.1%-100%
DALI DT8 (DALI consumption<2mA)/Push
Pulse Width Modulation
Logarithmic
•
DO NOT install with power applied to the device.
•
DO NOT expose the device to moisture.
Safety & Warnings
Operation
1.1 Press and hold down any of the two buttons until numeric digital display flashes, then release
the button.
1.2 Click any of the two buttons once to select a digit, click again to change the digit until the
desired DALI address appears. Click first button to set “tens” position and second button to set
“units” position. The address can be set from 00~63.
1.3 Then press and hold down any of the 2 buttons until the numeric digital display stops flashing
to confirm the setting.
0-6
0-9
1. Set DALI Address Manually Via Buttons
24V DC
LE
D
O
U
T
P
U
T
•
DALI
DT8
Dimmable LED driver
•
2 channels constant voltage output, total output power up to 75W
•
Class
Ⅱ
power supply, full isolated plastic case
•
High power factor and efficiency
•
PF > 0.96, Efficiency > 86%
•
Low standby power < 0.5W
•
DALI DT8 device to control Warm White and Cool White output via a single DALI address
•
Color temperature adjustment according to DALI specifications of Device Type 8, Color Type Tc.
•
Compatible with universal DALI masters that support DT8 commands
•
IP20 rating, suitable for indoor LED lighting applications
•
In compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, IEC 62386-209:2011
•
Built-in DALI-2 interface, DALI DT8 device
•
5 years warranty
WW-
CW-
UL8750, CAN/CSA C22.2 No. 250.13-14,
ENEC EN61347-1, EN61347-2-13 approved
AC 100-277V input
N
L
FG
A
C I
N
P
U
T
DA
DA
DA
LI I
NP
UT
DALI/Push Signal Input
0-6
0-9
Digital display
2 channels LED output
NC
NC
NC
Note: DALI address can be manually assigned from 00-63-FF, by factory defaults, no DALI address is
assigned for the dimmer, and the display shows . Setting DALI address as will reset the dimmer
to factory defaults.
2
186300H,
@ 230VAC at full load and 25
℃
ambient temperature
MIL-HDBK-217F
PUSH DIM
L
N
DA
DA
LED-Kanal
LED Channel
2
DC-Spannung
DC Voltage
24V DC
max. Strom
Max. Current
MAX. 3.12A/CH, CH1+CH2=3.12A
Spannungstoleranz
Voltage Tolerance
±1%
Nominale Leistung
Rated Power
max. 75W
Spannungsbereich
Voltage Range
100-277V AC
Frequenzbereich
Frequency Range
50/60HZ
Leistungsgrad (Typ)
Power Factor (Typ.)
> 0.99 @ 100VAC, > 0.96 @ 230VAC
Harmonische Gesamt- Verzerrung
Total Harmonic Distortion
THD ≤ 15% (@ full load / 230VAC)
Wirkungsgrad (Typ)
Efficiency (Typ.)
86% @ 230VAC full load
AC-Strom (Typ)
AC Current (Typ.)
0.9A @ 100VAC, 0.39A @ 230VAC, 0.33A@277VAC
Einschaltstrom (Typ)
Inrush Current (Typ.)
COLD START Max. 2A at 230VAC
Ableitstrom
Leakage Current
< 0.5mA /230VAC
Standby Stromverbrauch
Standby Power Consumption
< 0.5W
Dimm-Schnittstelle
Dimming Interface
DALI DT8 (DALI consumption < 2mA)/Push
Dimmbereich
Dimming Range
0.1%-100%
Dimm-Methode
Dimming Method
Pulse Width Modulation
Dimmkurve
Dimming Curve
Logarithmic
Output
Control
Input
