background image

Large clip

 (

2

x)

Small clip 

(

2

x)

Contents:

Front

Back

Holder bands 

(

2

x)

Filter fabric 

(

3

x)

MöllerMedical

Small fold for nose area

Large fold for chin area

Small clip

Large clip

Filter fabric

(

schematic

)

1.

 Fold fi lter fabric

Fold the narrow areas close to the top and bottom edges of 

the fabric towards the middle, so that the edges are parallel.

2. 

Placement of holding clips

Lay the larger plastic parts under the fabric, with the “Möller 

Medical” logo facing downwards and the holes towards the 

outer edges. Place the smaller plastic parts, one on each side, 

near the edges of the fabric. The back / the ridges on the clip 

should face upwards, away from the fabric surface.

3.

 Closing the holding clips

Clip the plastic parts together through the fabric by pressing 

until it is fi xed between the two parts. The fabric is pushed 

down into the large part. Repeat at the other end of the 

mask.

4. 

Attaching holding bands

Attach the enclosed elastic bands through 

the holes at the sides of the larger plastic 

parts. These can be used to fi x the mask 

securely over your ears.

When you put on the 

mask4all

, fold out the 

edges of the fabric over nose and throat (see 

drawing), to cover your nose and chin.

5. 

All done!

Now you can wear your self-assembled

mask4all

. Should the mask be too tight or too 

loose, the clips can be loosened and repositio-

ned. Manual stretching of the elastic bands 

before attaching / before wearing may also 

help to improve the fi t.

Instructions

Möller Medical GmbH

Wasserkuppenstr. 

29-31

36043

 Fulda, Germany

www.mask-4-all.de

Video tutorial:

20017987   2020-05 B

Отзывы: