molex Brad HarshIO 300 ePN, Руководство пользователя

Страница: 39 / 56

HarshIO 300 ePN

39

IP67 Digital I/O Modules for PROFINET IO
PE connected via PWR connector
Rotary Switches
The HarshIO 300
ePN has 3 rotary switches used to configure the different modes of PROFINET station
address assignment.
Position of the rotary in the Window
x 100 x 10 x 1
Example: Above position
700, the out-of-box position of the rotary switches.
PROFINET Station Assignment modes
Rotary
Switches
Position
Modes Description
700 DCP Start the HarshIO module with the PROFINET device name stored in the
Flash memory.
8xx DCP with auto naming Start the HarshIO module with a pre-configured PROFINET device
name.
ModuleName = “ molex-harshio- “+XX (rotary switch value)
This mode is very useful for a quick commissioning, maintenance, and
replacement of a module. No tool will be required to replace the
module. Just set the same rotary switch positions to replace it. This
method is very equivalent to PROFIBUS station address.
Example: if the rotary switched are in
823 position. The module name is
“molex-harshio-23”
Note: DCP A SetName command cannot change the ModuleName
900 Reset the HarshIO module with the default factory setting.