Air Head Crimp Tool for InsulKrimp™ Piggyback QD
Doc. No: ATS-640056200
Release Date: 09-19-06
UNCONTROLLED COPY
Page 7 of 7
Revision: C
Revision Date: 10-07-14
Air Powered
Crimp Tool Head
Insulkrimp
Certificate of Calibration
Order No. 64005-6200
Tool Order Number __________________
Tool Eng. Number___________________
Tool Revision______________________
Serial Number_____________________
Date of Manufacture
Pin Gauge of Conductor Nest/Nests or Slug height if the nest is the “F” Crimp style.
Range Conductor Nest # 1 = ____________- Actual = ____________-
Range Conductor Nest # 2 = ____________- Actual = ____________-
Range Conductor Nest # 3 = ____________- Actual = ____________-
Technician _______________________-
Date of Calibration __________________-
Calibration should be done every 5,000 cycles or 3 months.
Tools should be lubricated during this operation.
Visit our Web site at http://www.molex.com
