Auto Grip Pull Tester
Doc No: TM-638019100
Release Date: 08-10-09
UNCONTROLLED COPY
Page 10 of 20
Revision: E
Revision Date: 03-19-21
2.2
LCD Display
1.
Display Format
Main Display: Can show real time or peak values.
1.
Press and release ON/OFF button to turn on the gauge.
2.
Press and hold Info button for three seconds to view gauge information.
3.
Display Format is highlighted.
4.
Press Right Arrow to select Display Format.
5.
On the following screen, Main Display is highlighted. Press Right Arrow
to change Main Display.
6.
Use Up Arrow or Down arrow to select peak of real time value.
7.
Press Right Arrow to enter selection.
Molex recommends that peak value is used for Main display.
Menu navigation shown in Figure 2-3. Real-time and peak displays shown
below in Figure 2-4.
Figure 2-3
Figure 2-4