Auto Grip Pull Tester
Doc No: TM-638019100
Release Date: 08-10-09
UNCONTROLLED COPY
Page 6 of 20
Revision: E
Revision Date: 03-19-21
General Description
1.1 Description
The PT-1500 Auto Grip Pull Tester, order no. 63801-9100, is a manual, lever-operated digital pull
tester for checking pull strength of crimped terminals. The tester is designed to automatically grip
the wire as the hand lever is pulled down.
The unit is complete with display module, two multi-terminal grips, pull tester frame and an AC
adapter/charger for the display module. It has a 3-point NIST certification.
Principal Mechanical Parts of the Auto Grip Pull Tester
See Figure 1-1
1.
63801-9100 PT-1500 Pull Tester assembly
2.
63801-9101 Multi-terminal grip
3.
63801-9102 Clamp type terminal grip
4.
63801-9103 A.C. adapter / charger, 120 VAC
63801-9105 A.C. adapter / charger, 230 VAC
5.
63801-9104 Display module
1.2 Features
Single-stroke, ergonomic pull-down motion
Automatically grips sample wire as lever is pulled
Grips wire diameters up to 0.23” (8-30 AWG)
Lbf, kgf and Newton units are selectable
Digimatic and analog outputs
Display module is easily removed for recalibration or repair
Runs on internal rechargeable batteries or AC adapter (120 or 230 VAC)
NIST Calibration Certificate included
1.3 Technical Specification
Dimensions See Figure 1-2
Width: 475.00-545.00mm (18.70 to 21.45”) (Depending on the handle position)
Depth: 150.00mm (5.90”)
Height: 400.0mm (15.74”)
Weight: 10.88kg (24 lb.)
1
2
3
4
5
Figure 1-1