Auto Grip Pull Tester
Doc No: TM-638019100
Release Date: 08-10-09
UNCONTROLLED COPY
Page 11 of 20
Revision: E
Revision Date: 03-19-21
Footer: Optional information that can be added to the display.
1.
Press and release the ON/OFF button to turn on the guage.
2.
Press and hold the Info button for three seconds to view gauge
information.
3.
Display Information is highlighted.
4.
Press Right Arrow to select Display Format.
5.
On the following screen, press Down Arrow to highlight Footer. Press
Right Arrow to change the Footer.
6.
Use Up Arrow or Down Arrow to select none, last values or real-
time value/peak value. Peak and real-time value cannot be selected
for the Footer if they are already selected for the Main Display. If the
peak value is selected for the Main display, the real-time value will be
available for the footer. If the real time value is selected for the Main
display, then peak value will be available for the footer.
7.
Press Right Arrow to enter selection.
Menu navigation shown in Figure 2-5. Real-time and peak displays with
Footer are shown in Figure 2-6 below.
Figure 2-5
Figure 2-6