molex 63600-0478, Техническое описание, Страница: 1 / 4

IDT Manual Hand Tool
Doc No: ATS-636000478 Release Date: 12-22-05
UNCONTROLLED COPY
Page 1 of 4
Revision: C Revision Date: 07-27-15
IDT
Manual
Hand Tool Application Tooling
Specification Sheet
Order No. 63600-0478
FEATURES

A full cycle ratcheting hand tool ensures complete crimps

Use with interchangeable Change Head modules that are easy to install

This tool is designed for prototype, low volume, and field repair applications
SCOPE
This Hand Tool is intended to be used with the Change Head Modules listed below:
Change Head List
Order No. Engineering No. Connector Series No. Connector Description
11-21-5196 AM60116
7674 7475 KK® IDT Double Cantilever Contact 3.96mm (.156") Pitch, 2 to 16 Circuits.
40791 40915 IDT 3.96mm (.156") Pitch, 2 to 24 Circuits
11-21-5197 AM60115
7720 7720S KK ® IDT Double Cantilever Contact, 2.54mm (.100") Pitch,
2 to 28 Circuits.
40555
11-21-8365 AM60519
7720
KK ® IDT Double Cantilever Contact, 2.54mm (.100") Pitch,
2 to 28 Circuits. 40555
11-21-9756 AM60512A 70156 5.08mm ( .200") Pitch , Female Type IDT Connector
11-31-3337 AM60571
87259 87568 Mill-Grid™ IDT 2.00mm (.079") Pitch Cable-to-Board, 10 to 50 Circuits.
70625 71247
MX-50™ 1.27mm (.050") Pitch Slimline Ribbon Cable,
6 to 64 Circuits. 70121 71898
11-31-3339 AM60539 70121 MX-50™ 1.27mm (.050") Pitch Slimline Ribbon Cable, 6 to 64 Circuits.
11-31-3340 AM60575 Cable Shear
11-31-4652 AM60577
5320 40312 QF-50™ 2.54mm (.100") Pitch Receptacle 10 to 64 Circuits.
70625 71247 MX-50™ 1.27mm (.050") Pitch Slimline Ribbon Cable,
6 to 64 Circuits.
71898
11-31-8939 AM60087 42219 42254
SPOX™ IDT
2.50 mm (.098 inch) Pitch, 2 to 15 Circuits
11-32-5759 AM63186 87259 Mill-Grid™ IDT 2.00mm (.079") Pitch, 10 to 50 Circuits.
11-32-6027 AM63175 71156 5.08mm (.200") Disk Drive Power Connector
11-39-0273 AM63538 30452 IDT 2.00mm (.079") Pitch, 2 to 21 Circuits
11-39-0303 AM63534 71690 71694 Mini-Fit IDT™ 4.20mm (.165") Receptacle and Plug, 2 to 12 Circuits.
62100-0300 62100-0300 70107 71178 SL™2.54mm (.100") Pitch Wire-to-Wire Crimp Connector 2 to 25 Circuits.
62100-0400 62100-0400 7674 7675 KK® IDT Double Cantilever Contact. 3.96mm (.156") Pitch, 2 to 16 Circuits.
62100-0700 62100-0700
70400 70475 SL™2.54mm (.100") Pitch Insulation Displacement, 2 to 25 Circuits.
90187 C-Grid III™ 2.54mm (.100") Pitch
62100-2000 62100-2000 87568 Mill-Grid™ IDT 2.00mm (.079") Pitch Cable-to-Board, 10 to 50 Circuits.
69008-0225 69008-0225
7720 7720S
KK® IDT 2.54mm (.100") Double Cantilever Contact, 2 to 28 Circuits
7795 40555
69008-0240 69008-0240 7674 7475 KK® IDT Double Cantilever Contact 3.96mm (.156") Pitch, 2 to 16 Circuits
69008-0250 69008-0250
5320 5320
QF 50™2.54mm (.100") Pitch, 10-64 Circuits.
40312 90635